CONQUIP   SUPPLYING EQUIPMENT SINCE 1974



AVAILABLE SYMONS CONES
NORDBERG SYMONS™ cone crushers are in world-wide demand. In recent years many of the Symons 4 1/4 crushers have been mounted on a chassis to make them portable. While making them more convenient, it has also raised their cost, and made them even more expensive to ship.

Symons cone crushers were designed and made to last for decades, with many units still in operation after 75 years. The basic frames and design were good, and will last even longer if they have been well-maintained.

Because cone crushers are such a long term investment, it is well worth paying more to get crushers that have been well-maintained, have been reconditioned, or have been updated with some of the new features described on our Symons Cone crushers page.

Good used cone crushers can provide another 50 years or more of productivity with a good maintenance program, and normal repair of the wearing surfaces, seals, and liners.

Symons cone crusher availability can change rapidly, and the following list is an example of currently available Symons cone crushers.

SYMONS 4 1/4 SHORTHEAD OR STANDARD CONFIGURATION

These crushers will have fully reconditioned mainframes and adjustment rings made in the USA. All needed components will be new as needed to meet factory specifications for tolerances and quality. Crushers will be torn down to the main frame, inspected, and re-assembled to factory specifications, cleaned and painted. Crusher will be
fully balanced.
We will install new liners of your choice at your cost.
The crusher will be updated with the following improvements:
•    Hydraulic Clamp & Adjust System
•    Packaged Lube System
•    Air/Oil Cooler assembly

OPTIONS:
The following improvements can be added.
New Tramp Release System for $39,900
New Turbo Kit: S - $8,900 and SH – $11,490
For full details on the features and benefits of the listed improvements please go to our
Symons Cone crushers page.

Crusher is available in 6 weeks after the receipt of the order. We will provide full support in arranging transportation to your destination.

Symons 5 1/2' shorthead

See below for details

SYMONS 7' CONE CRUSHERS Standard (1970) and 1 – SH (1974)
Both are fully reconditioned with 90% new parts including new hydraulics and lube systems. Fabricated frames with external pins. Options available include Turbocharge kits and Tramp Release Systems. Please contact us for additional information.



1352 OMNICONE
Made in 1990 in USA.

Fully reconditioned with $75,000 of new parts and repairs. Currently configured as a secondary crusher with coarse liners. Full hydraulic Clamp, Adjust and Tramp Release System. Fully balanced.
Please contact us for additional information.




We also have available:
Portable Symons 4 1/4 cone mounted on chassis with lubrication system and oil cooler.
Portable Symons 4 1/4 cone mounted on chassis with lubrication system and screen.
Bare Symons 4' cone crusher that needs new bushings.

For other cone crushers go to our main Cone Crushers page.
For more information on cone crushers in general go to
www.usedconecrushers.com

Please contact us for your Symons cone crusher needs. If you are unsure what size you need, we would be pleased to make suggestions. Please contact us

NORDBERG SYMONS™ 5 ½ SH SHORTHEAD CONE CRUSHERS

BUY IN CURRENT CONDITION OR FULLY RECONDITIONED
CAN BE CONVERTED INTO STANDARD CONFIGURATION

CURRENT CONDITION



Additional pictures

Nordberg Symons™ 5 1/2SH (shorthead) (can be converted to standard) cone crushers: Crushers were removed in running condition from a limestone quarry. The application was non-abrasive and crushed easily. The crusher still has the original manganese liners. There is the normal wear but overall it is in working condition. It is a partially balanced crusher.

The socket seal should be replaced, and the bushings do have some hotspots on them. The crusher should be disassembled and reconditioned as necessary to make it into good working condition prior to commissioning.

OPTION: Hydraulic power pack with hydraulic adjustment rams and hydraulic lockpost clamps, and a new and improved lubrication system. 

FULLY RECONDITIONED



•    Crusher will be completely disassembled down to the basic frame.
•    Unit will be fully inspected and all clearances, components, and parts will be evaluated and compared to original factory specifications.
•    All critical parts will be repaired or replaced as necessary.
•    All critical clearances will be restored to be within factory tolerances.
•    Remaining parts will be steam cleaned and checked for proper functioning, structural soundness, and to be within factory tolerances.
•    Seals will be replaced as necessary, and crusher partially balanced.
•    Crusher will be reassembled by qualified technicians and painted. Because the choice of liners depends upon customer preferences and needs, we will install new liners of your choice at your cost.

OPTIONS TO IMPROVE PRODUCTIVITY AND LOWER MAINTENANCE COSTS
•    Hydraulic pressure relief system
•    Rotating feed distributor to provide better feed distribution
•    Turbocharge system to improve production and cubical products
•    Skid mounted lubrication system with improved design and components

Click here for what improvements can be done.

CAN BE CONVERTED INTO A STANDARD CONE CRUSHER

PRICING DEPENDS UPON CUSTOMER’S CHOICES AND CAN BE FOB, FAS, CFR, OR CIF.

PROFESSIONAL PREPARATION FOR SHIPMENT








Nordberg Symons is a registered trademark of Metso Minerals Inc.






   

Website Builder